Gem Medic
进入中文版  中文版 进入英文版  ENGLISH
Contact Us

Tel: +86-371-60997506
Fax: +86-371-60997506
Mobile: +86-15838280034
Add: No.20, Bosong Rd, Zhengzhou City, Henan Province,China

Online Service

Skype: shadowcrsg
QQ: 153448046
MSN: Skype: shadowcrsg QQ: 153448046

Products > Drug of Abuse Test > Urine Drug Abuse Test Device > PPX Propoxyphene Test Strip PPX-U01D
Product name : PPX Propoxyphene Test Strip PPX-U01D
Item : PPX-U01D
 Enlarge Image                   Back
←[Previous Product]              [Next Product]→


Product Name



Catalog No. 


Strip width 


PPX Propoxyphene Test Strip 











  1. High sensitivity, simple, easy.
  2. Accuracy: >99%.
  3. CE & ISO approved.
  4. Specimen: Urine.
  5. Model No:PPX-U01D.


The One Step Propoxyphene Test Strip is a lateral flow chromatographic immunoassay for the qualitative detection
 of Propoxyphene in human urine at a cut-off concentration of 300 ng/mL. It is a prescription assay intended for
 use by healthcare professionals including those at point of care sites.

This assay provides only a preliminary analytical test result. A more specific alternate chemical method must be 
used n order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) is the 
preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug
of abuse test result, particularly when preliminary positive results are used.

Allow the test strip, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.

Bring the pouch to room temperature before opening it. Remove the test strip from the sealed pouch and use it as 
soon as possible.

With arrows pointing toward the urine specimen, immerse the test strip vertically in the urine specimen for at least 
10 to 15 seconds. Do not pass the maximum line (MAX) on the test strip when immersing the strip. See the illustration
lace the test strip on a non-absorbent flat surface, start the timer and wait for the red line(s) to appear. The 
result should at 5 minutes. Results may be stable up to 4 hours after test initiation.

NEGATIVE:* Two lines appear. One red line should be in the control region (C), and another apparent red or pink
line shouldbe in the test region (T). This negative result indicates that the oxycodone concentration is below the 
detectable level (100ng/mL).

* NOTE: The shade of red in the test line region (T) will vary, but it should be considered negative whenever there is 
even a  faint pink line.

POSITIVE: One red line appears in the control region (C). No line appears in the test region (T). This positive 
result indicates that xycodoneconcentration exceeds the detectable level (300 ng/mL).

INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most 
likely reasons for control line failure. Review the procedure and repeat the test using a new test strip. If the problem
persists, discontinue use of the lot immediately and contact the manufacturer.

Related Products :
K2 Synthetic Cannabis Test Cassette K2-U02D
K2 Synthetic Cannabis Test Cassette K2-U02D
(MTD) Methadone Test Cassette MTD-U02D
(MTD) Methadone Test Cassette MTD-U02D
EDDP Test Cassette EDDP-U02B
EDDP Test Cassette EDDP-U02B
COT Cotinine Test Cassette COT-U02D
COT Cotinine Test Cassette COT-U02D
(MDMA) Ecstasy Test Cassette MDMA-U02B
(MDMA) Ecstasy Test Cassette MDMA-U02B
OPI Opiate Test Cassette OPI-U02D
OPI Opiate Test Cassette OPI-U02D
MOP/MOR Morphine Test Strip MOP-U01D
MOP/MOR Morphine Test Strip MOP-U01D
(BZO) Benzodiazepine Test Strip BZO-U01D
(BZO) Benzodiazepine Test Strip BZO-U01D