Product Name
|
Specimen
|
Format
|
Catalog No.
|
Sensitivity
|
Strip Width
|
Certificate
|
FSH Menopause Test
|
Urine
|
Strip
|
FSH-U01A
|
10miu,20miu,25miu
|
2.5mm
|
CE/FDA
|
FSH-U01B
|
3.0mm
|
FSH-U01C
|
3.5mm
|
FSH-U01D
|
4.0mm
|
Details:
This product is composed of the glass fiber strips of monoclonal antibody against FSH.Anti-mouse IgG solid
cellulose nitrate memberance and the bonders of absorptive colloidal gold-monoclonal antibody are against FSH.
It adopts the principle of double antibody sandwich method and immunochromatography to test the FSH in the
urine.
Characteristic:
-
Format: strip,cassette,midstream
-
Accuracy: >99%
-
Reaction Time:5 minutes
-
Fast to test
-
Easy to operate
-
Sensitive and accurate result
-
Competitive price
TEST PROCEDURE:
-
To begin testing; open the sealed pouch by tearing along the notch..Remove the test from the pouch.
Immerse the strip into the urine with the arrow end pointing towards the urine.
-
Do not immerse past the MAX (maximum) line. Take the strip out after 3 seconds and lay the strip flat on
a clean, dry, nonabsorbent surface (e.g., mouth of the urine container).
-
Wait for colored bands to appear. Depending on the concentration of FSH in the test specimen, positive
results may be observed in as short as 40 seconds. However to confirm negative results,the complete
reaction time (5 minutes) is required. Do not read the results after 10 minutes.
-
Re-cap the device and wait for color band to appear. Read results within 5 minutes
Using Method:
POSITIVE: Two lines are visible and the test line (T) is the same as or darker than the control line (C). A positive
result indicates that FSH levels are higher than normal and the subject you may be experiencing peri-menopause.
NEGATIVE: Two lines are visible, but the test line (T) is lighter than the control line (C), or there is no test line. A
negative result indicates that the subject is probably not experiencing peri-menopause in this cycle.
INVALID: Control line (C) fails to appear. Insufficient specimen volume or incorrect test performance are the most
likely reasons for an invalid result. Review the procedure and repeat with a new test. If the problem persists,
discontinue using the test kit immediately and contact.
