Product Name
|
Specimen
|
Format
|
Catalog No.
|
Cut-off(ng/ml)
|
Strip width
|
Certificate
|
(THC)Marijuana Test
|
Urine
|
Strip
|
THC-U01B
|
50
|
3.0mm
|
CE/FDA
|
THC-U01D
|
4.0mm
|
Note:Could be customized under your request
Specifications
(THC)Marijuana Test Strip
Sensitivity:50ng/ml
Format:strip
Model No:THC-U01B
OEM package is ok
Sample Collection And Preparation
Collect urine samples in clean, dry containers, either plastic or glass, without any preservatives. Urine specimens may be refrigerate (2-80C) and stored up to forty-eight hours. For longer storage, freeze samples (-200C or below). Bring frozen or refrigerated samples to room temperature before testing.
Urine samples exhibiting visible precipitates should be filtered, centrifuged or allowed to settle. Use only clear aliquots for testing.
Assay Procedure
Review Specimen collection instructions. Test device, patients samples, and controls should be brought to room temperature (20-30) prior to testing. Do not open pouches until ready to perform the assay.
Remove the test strip from its protective pouch (bring the device to room temperature before opening the pouch to avoid condensation of moisture on the membrane). Label the device with patient or control number.
Fill a test tube or urine cup with sample. Holding the strip vertically, place it into the sample container. the urine level should not be higher than the mix level indicator line on the strip.Do not cover the urine over the max (maximum) line. You may leave the strip in the urine or you may take the strip out after a minimum of 15 seconds in the urine and lay the strip flatly on a non-absorptive clean surface.)and then start the timer. Use a separate pipette and device for each sample or control.
Read result between 3 to 8 minutes after the addition of samples. Do not read result after 8 minutes.